Skye Reversible Dress Tutorial and Pattern
Our Skye pattern is an easy-going, but elegant tank dress that you can wear both ways. Versatile and reversible, it can be worn with the buttons in the front or down the back offering two different neckline options to go with your mood.
Simple and practical, Skye is easy to sew and would be suitable for all level sewists. Make the most of your sewing with this fun little dress.
Materials
For our sample US size 6 pictured in this tutorial we used 2 yards of IL042 907 FS Premier Finish Medium Weight Linen.
For other sizes, please refer to the yardage table in the PDF pattern to determine the required amount of fabric.
Matching sewing thread, 10 medium buttons (1/2”-3/4” wide)
Tools
Scissors, pins, ruler, chalk, measuring tape, fabric marker, buttonhole foot, seam ripper, needle, sewing machine
Difficulty
Beginner
Sewing Time
4-5 hours
Pattern
You can access the multi-sized printable PDF pattern by following this link HERE. All seam allowances are included and are 3/8” unless otherwise specified. The model is wearing US size 6.
Remember to transfer all the notches onto your fabric.
Steps
Note: Prewash your fabric and tumble dry it until it is still slightly moist, dry at room temperature. Iron the fabric so it is easier to work with.
1. To start, apply fusible interfacing (optional) to the wrong side of your button bands and sew as explained in this detailed tutorial.
2. Pin and stitch the front and back pieces right sides together at the shoulders using a standard 3/8” (1 cm) seam allowance. Finish the seams with your preferred method (serge or zigzag the raw edges together) to prevent fabric from fraying. Press towards the back.
3. Bind the neckline as explained in this step-by step tutorial.
Be careful not to stretch the fabric and tuck in the ends as shown:
4. Finish the raw side seam edges of your front and back bodices separately. Pin the side seams right sides together and stitch the pinned edges at a 3/8” (1 cm) seam allowance stopping at the notches indicating the beginning of the slits. Remember to backstitch at the beginning and the end of each seam. Press the seams open and the slits seam allowance 3/8” to the wrong side.
5. Topstitch the edges around the slits to keep them in place.
6. Bind the armholes using the same technique explained in this tutorial.
7. Hem the bottom of the dress. Fold the fabric twice to the wrong side (first 3/8”, then another 1/2″), press, pin and edgestitch.
8. Lastly, sew the buttonholes and attach the buttons to the front opening. For the buttonholes, you can follow our detailed tutorial HERE. As for the buttons, check our tutorial HERE for instructions.
Overlap the bodice and place a pin into the center of each buttonhole. This is where you’ll need to attach the button.
9. Give your finished dress a good last press and you are all done!
We love seeing what you make! Don’t forget to share your pictures and tag your creations with #FabricsStoreSkyePattern hashtag.
Whether you are looking for natural or bright colors, heavier or lighter linen, we have something for everyone. Browse our selection of linen fabrics and find the color that inspires you for this project!
Leave a comment
Related posts
Sewing Essentials: Stitch Width, Stitch Length & Needle Position
Thinking back to my high school textiles days, I remember having to test stitch settings on every fabric we planned to use for our projects. We would cut out little squares of fabric and experiment with different stitch lengths and widths, and edge-finishing techniques. At the time, it felt unnecessary, not to mention tedious….
Sewing Essentials: A Simple Guide to Notches
I love a notch, so much so that I’ve decided to dedicate this article to these small but important markings. Here, I’ll explain why they’re so helpful, when to use them, and how to add them to your own patterns or adapt them for existing ones. What exactly are notches? Notches are small markings found…
How to Select and Use Interfacing: A Simple Guide
Iron-on or sew-in, woven or non-woven, lightweight or heavyweight. With so many different types, weaves, and weights to choose from, how do you know which interfacing is best for your project? In this article, I will explain the two main types of interfacing before diving into the differences in weave and weight. Hopefully by the…
Sewing Essentials: A Simple Method for Reversible Seams
There are so many ways to finish a seam, from good old overlocking to French seams and binding. I recently stumbled across another method that’s pretty nifty, and honestly, I kind of wish I had known about it sooner. It is a bit like binding, but topstitched in place so it doesn’t move or flap…
An Introduction to Common Crotch Adjustments
Recently, I drafted a pattern and made a toile of a pair of drop-crotch pants. When I tried them on, I straight away noticed (and felt) they weren’t quite right. The most obvious issue was that the back crotch felt tight and pulled uncomfortably, especially when bending over. Walking also felt a little restricted, with…
SEW THIS LOOK
Latest Posts
9 Comments
Pam Hopkins
I struggle with adjusting sizes and I am 41 bust. I cut my pattern out as an X;L and boy is it. I wish I cut it out as a large. I didn’t realize the finished garment was 44.5 inches. Live and learn.
Rosaleen Sullivan
Thanks for the ideas and this pattern. I’m not a fan of buttons and button holes, so am likely to change the design a bit to work around them. Reversible clothing is such an intriguing idea! I might try making this dress first just without the button feature, and consider making a second one as a double-reversible, that is, two versions, one inside the other, so it can be worn with either side showing as well as changing from front-to-back.
Amber Ivie
Cute dress pattern, but ended up being rather ill-fitting. I made a large based on the measurements. the straps are far apart and the arm holes are too deep by several inches. I took in the side seam at the under arm and graded toward an inseam pocket and shortened the straps. Both helped a little with the arm hole gaping, however the straps consistently fall off and are generally uncomfortable.
emily christine cote
I made this dress last year and forgot to leave a comment. It is lovely! I’m new to garment construction, and I had no trouble figuring everything out. I made this dress in a very heavyweight linen and it works well for both summer and winter – I think I will try it in a lighter weight next time. Beautiful pattern, thank you,
Andrea Derose
LOVE this dress!!! I made it in IL019 Signature finish, bleached. Size 4/6, cut 6″ from the length (I’m 5′ tall), made shoulder seams 1.75″ to snug up the neckline and armholes, and side seams .25″ just for a skosh more room. Fits perfectly!
Pingback:
2021 shopping plans - Chelsea Q. White blogCharlene Maguire
I just ordered my first linen, and was so excited to find this pattern, as I’m a new sewer and it looks like something I can complete. However, there are problems with the pattern once downloaded. First, none of the numbers on the pages print out, the gray is too light for the computer/printer to pick up on, I guess. Second… I can’t scale this pattern. I set it for 12-14, and still got the lines for all sizes. Would love to sew this dress, but I don’t think I’ll be able to do so, I have no idea how to tell which size line is which.
Andrea Andre
I made this as a Large in a cream color but I am slim-framed (narrow, boney shoulders and neck) with a wide chest and hip measurement. It was a little baggy and my bra was showing so I put a white linen tank under it and accessorized it with a long braided silk scarf and got a nice look going without having to make any alterations.
2 comments:
1. Make the top buttonhole with you machine BEFORE you put the bias tape on the neck because mine would not fit through my machine, it was too bulky and I had to take it apart and then the top got a little messy. Set me back an hour.
2. Also, I was confused by the bias tape pattern for the neck. It said cut 2 on the bias fold as a diagonal and I thought that was a lot and it would waste a lot of surrounding fabric so I just made tape using her other method blog.fabrics-store.com/2016/11/04/sewing-glossary-how-to-make-your-own-bias-tape-tutorial/ and cut it the the length I needed. Arm holes were fine.
Eileen Alexander
What a lovely summer dress. I looks simple to make and comfortable to wear. Thank you for this free patten and tutorial.