Tutorial: How to Sew the Bust Darts for Nico Pattern
This tutorial is to support the dart instructions in the Nico Pattern booklet found on page 23.
Transfer the dot markings from the Front (Piece A) to your fabric using your preferred method. This tutorial uses small red dots with a fabric pen.
Fold the upper strap down to align the dart edges with wrong sides together. Pin or clip in place.
Sew the dart legs together using a 1/4″ seam allowance. Begin from the side seam edge and sew towards the bust. Continue sewing with a 1/4″ seam allowance until you reach the end of the fabric. Backstitch or tie threads in a knot to secure.
Note: Do not sew to the dot marking yet. Just sew a 1/4″ seam in this step.
This is how your first seam will look on the other side. Note how far away the stitching line is still from the dot marking.
To complete the French Seam bust dart, fold the dart right sides together enclosing the raw edges of your seam allowance in the fold and aligning with the pattern marking. Press.
Sew with a 3/8″ seam allowance ending at the dot marking.
To avoid pointy darts, there are two options: 1) Curve the last few stitches towards the fold of the fabric near the dart point. Use a gentle inwards curve. Or 2) When you reach the dart marking, sew a few stitches past it right along the edge of the fold.
That’s it! Be sure to press your dart over a curved surface like a tailors ham or a rolled-up towel.
Leave a Reply to SUZANNE HUTCHINSON Cancel reply
Related posts
Blending Between Sizes on a Sewing Pattern – Part 1: When to Blend
Let’s be honest—finding a sewing pattern that perfectly matches your measurements is pretty rare. And that makes sense! Every body is unique, fit preferences vary, and each pattern brand uses its own sizing system. If you find yourself falling between sizes, you’re not alone. But the beauty of sewing is that in these situations, you…
How Much Fabric Do You Need? A Simple Estimation Guide
Starting a new sewing project is always exciting. But there is nothing more frustrating than running out of fabric halfway through… or ending up with scraps that aren’t quite big enough for anything useful (trust me, I’ve been there! I have a whole drawer full of pieces like this). If you’re working with a commercial…
Understanding Seam Allowance: A Simple Guide
Every garment needs seam allowance—it’s a crucial part of garment construction. Sometimes it’s already included in the pattern; other times, it may need to be added, especially when working with a self-drafted pattern or after making adjustments. Seam allowance is the extra fabric added around the edges of a pattern piece. It creates space between…
Sewing Essentials: Dart Manipulation
Dart manipulation is a pattern making technique used to reposition a dart on a garment without altering or adjusting its overall fit. Essentially, it’s a way to move the shaping in your pattern to a new location. Dart manipulation lets you customise a sewing pattern to suit your design preferences. Whether you want to move…
Checking, Blending, and Truing Your Sewing Patterns – Part 2
In Part 1 of this tutorial, I covered the fundamentals of truing—aligning seam lines, smoothing curves, and refining edges—to create polished, professional patterns. Now, in Part 2, I will dive a bit deeper into more specialised examples of truing—hems, darts, and seam allowances. These details require a little more attention to ensure they blend smoothly…
SEW THIS LOOK
Latest Posts
4 Comments
Lauren Linen
This comment was emailed through to us from Campodifiamme:
A little tip from sewing class years ago
Pull thread up from the bobbin and reverse thread the needle, take-up and tension etcetera. Making sure you have enough thread to sew the length of the dart
Start sewing at the point/tip of the dart, no backstitching is needed at the point, no dangling threads to show in sheer fabrics
Kelly Singh
Thank you. Very, very helpful. I struggled tremendously with these when I made the Nico. I was getting back into sewing after many years and I’d never even heard of a French dart.
Sophie Hamilton
The more helpful tutorial would be how to Lower these darts, so they sit more towards the waist like a French Dart should, and not so high and directly under your armpits which looks ridiculous.
SUZANNE HUTCHINSON
I’m with Sophie Hamilton – I would like to know how to lower the dart as it is too high. Even in the pictures shown at the beginning of the blog post, the dart point is positioned too high on the person.